We are a team of certified professionals with lots of experience in editing H3C GB0-191-ENU dumps VCE file. Every candidate should have more than 8 years' education experience in this industry. We have rather a large influence over quite a quantity of candidates. Our GB0-191-ENU real dumps are honored as the first choice of most candidates who are urgent for clearing Constructing Small - and Medium - Sized Enterprise Network exams. With so many years' concentrated development we are more and more mature and stable, there are more than 9600 candidates choosing our H3C GB0-191-ENU dumps VCE file. We now have good reputation in this field. We are more than more popular by our high passing rate and high quality of our GB0-191-ENU real dumps. Our education team of professionals will give you the best of what you deserve.
7*24 online service support; Best and professional customer service
We have an complete online support system which is available for every candidate who is interested in H3C GB0-191-ENU dumps VCE file 7*24, and we will answer your query in time, you can ask us about the professionals and can also ask for H3C Constructing Small - and Medium - Sized Enterprise Network exam, we will offer you the best of solutions free of charge.
Instant Download: Our system will send you the GB0-191-ENU braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
Three versions of our high-quality H3C GB0-191-ENU dumps VCE file
We sell three versions of our high-quality products which satisfy different kinds of study demands: PDF version, Soft (PC Test Engine), APP (Online Test Engine). A part of candidates are interested in PDF version of GB0-191-ENU real dumps as they are accustomed to this simple and traditional learning method.
Questions and answers materials for these three versions of GB0-191-ENU premium VCE file are same. Also there are a part of candidates who like studying on computer or electronic products. Soft (PC Test Engine) of Constructing Small - and Medium - Sized Enterprise Network VCE files is for candidates who are used to learning on computer. It is installed on the Windows operating system and running on the Java environment. You can use practice test VCE any time to test your own exam simulation test scores. Our H3C GB0-191-ENU dumps VCE file boosts your confidence for real exam and will help you keep good mood in real test.
APP (Online Test Engine) of GB0-191-ENU real dumps has same functions with soft (PC Test Engine). This version is possessed of stronger applicability and generality. By contrast, Online Test Engine of Constructing Small - and Medium - Sized Enterprise Network exam VCE is more stable and the interface is more humanized.
H3C GB0-191-ENU Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| LAN Switching Technologies | 20% | - Spanning Tree Protocol - VLAN trunking and link aggregation - Ethernet principles and VLAN |
| Computer Network Fundamentals | 20% | - OSI and TCP/IP models - Common network interfaces and cables - TCP/IP protocol suite and subnetting |
| Network Services and Security | 15% | - DHCP and DNS services - ACL and NAT configuration - Port security and device hardening |
| H3C Device Basics | 15% | - Basic configuration and management - Remote access and system maintenance - Command line interface and file system |
| IP Routing Technologies | 20% | - RIP protocol fundamentals and configuration - Introduction to OSPF basics - Static routing and default route |
| WAN and Interconnection | 10% | - VPN and basic WLAN concepts - Network fault diagnosis - Common WAN access technologies |
H3C Constructing Small - and Medium - Sized Enterprise Network Sample Questions:
If you want the current configuration to continue to take effect after the system restarts, you should use the _______ command to save the current configuration to the configuration file before restarting the device. (Please write full order)
Reveal Solution Discussion 0Correct Answer:
save
The Ethernet port Ethernet0/0 of router MSR-1 is configured as follows:
interface Ethernet0/0
ip address 192.168.0.1 255.255.255.0
A three-layer switch is connected to this interface, and this three-layer switch is the default gateway of multiple network segments of the customer's office network. For security reasons, the customer now requires configuration on the interface Ethernet0/0 of MSR-1 ACL (does not restrict the application direction) to prohibit all users on the office network from pinging 192.168.0.1, which of the following configurations can be used? (multiple choice)
- A. acl number 3000 rule 0 deny icmp destination 192.168.0.1 0 icmp-type echo-reply
- B. acl number 3000 rule 0 deny icmp destination 192.168.0.1 0
- C. acl number 3000 rule 0 deny icmp destination 192.168.0.1 0 icmp-type echo
- D. acl number 3000 rule 0 deny ip destination 192.168.0.1 0 eq icmp
Correct Answer: B,C 🗳️
Which part of the subnet division technology is implemented on the basis of the natural classification of IP address division?
- A. host number part
- B. Subnet number part
- C. Network number part
- D. prefix part
Correct Answer: B 🗳️
Two empty-configured MSR routers RTA and RTB are interconnected back-to-back through their Serial1/0 interfaces. Do the following configuration on the two routers:
RTA: skip
[RouterA-Serial1/0] link-protocol fr ietf
[RouterA-Serial1/0] ip address 10.1.1.1 30
[RouterA-Seria11/0] fr map ip 10.1.1.2 30
RTB: [RouterB-Serial1/0] link-protocol fr ietf
[RouterB-Serial1/0] interface serial0/0.1
[RouterB-Serial1/0.1] ip address 10.1.1.2 30
[RouterB-Serial1/0.1] fr map ip 10.1.1.1 30
The physical link between the routers is good, so the correct statement below is ______. (Multiple choice)
- A. You can ping 10.1.1.2 on RTA
- B. In the above configuration, if you only change the type of sub-interface serial0/0.1 on RTB to P2MP, then you cannot ping 10.1.1.2 on RTA.
- C. DLCI is not configured on the two routers, and RTB cannot be pinged on RTA
- D. Can't ping 10.1.1.2 on RTA
- E. In the above configuration, if you only change the type of sub-interface serial0/0.1 on RTB to P2MP, then you can ping 10.1.1.2 on RTA
Correct Answer: B,D 🗳️
On the MSR router, once the system time is inaccurate, you can use the ______ command to adjust the system time.
- A. clock
- B. clock datetime
- C. time
- D. set datetime
Correct Answer: B 🗳️
Viewing page 1 out of 87 pages.
Viewing questions 1-5 out of 434 questions.
Tobey 
Kennedy 
Matthew 
Joy 
Levi 
Reuben 
Dean 
Yedda 
Frederica 
Barnett 
Lennon 
Dale 
Blake 
Ford 
Lionel 
Lynn 
Stanley 
Broderick 
Hiram 
Enid 
Ada 
