Get all the Information About EMC DEA-5TT2 Exam 2023 Practice Test Questions
Check Real EMC DEA-5TT2 Exam Question for Free (2023)
EMC DEA-5TT2 exam covers a range of topics related to networking, including network architecture, protocols, security, and troubleshooting. DEA-5TT2 exam is divided into four main sections: networking fundamentals, network infrastructure, network security, and network troubleshooting. DEA-5TT2 exam consists of 60 multiple-choice questions, and candidates must achieve a score of at least 63% to pass. Successful candidates will receive the Associate - Networking certification from Dell EMC, which is recognized globally as a valuable credential in the IT industry.
EMC DEA-5TT2 (Associate - Networking) Exam is an industry-standard certification exam that is designed to evaluate the knowledge and skills of candidates related to networking technologies. Associate - Networking Exam certification exam is intended for professionals who are looking to establish their careers in the field of networking and want to validate their skills and knowledge. DEA-5TT2 exam focuses on various topics such as networking concepts, network architecture, network design, network security, and network management.
NEW QUESTION # 33
How is a switch different from a hub?
- A. A switch does not include any latency into the frame transfer time.
- B. A switch decreases the number of broadcast storms.
- C. A switch operates at a lower, more efficient layer of the OSI model.
- D. A switch tracks MAC addresses of all connected devices.
Answer: D
NEW QUESTION # 34
Which IP address is in the Class B range?
- A. 191.56.44.200
- B. 192.15.48.130
- C. 100.100.90.87
- D. 126.16.20.48
Answer: A
NEW QUESTION # 35
The IEEE separates the Data Link and Physical ISO layers into four sub-layers. Based on the exhibit, what is the correct order of these sub-layers; from lowest to highest?
Answer:
Explanation:
NEW QUESTION # 36
Which message is sent by a router when TTL expires?
- A. Echo request
- B. Echo reply
- C. Destination unreachable
- D. Time exceeded
Answer: D
NEW QUESTION # 37
Which fields are mandatory TLVs in a LLDP PDU frame?
- A. Port Description, System Name, and System Description
- B. System Capabilities and Management Address
- C. IP Address, Default Gateway, and DNS
- D. Chassis ID, Port ID, and Time-to-Live
Answer: D
NEW QUESTION # 38
Which flags are used in the TCP header to initiate and end TCP connections or sessions?
- A. Initiate = Acknowledge (ACK) End = Finish (FIN)
- B. Initiate = Finish (FIN) End = Synchronize (SYN)
- C. Initiate = Synchronize (SYN) End = Finish (FIN)
- D. Initiate = Acknowledge (ACK) End = Synchronize (SYN)
Answer: C
NEW QUESTION # 39
Router A is directly connected to Router B over an Ethernet link. The local interface address for the Router A Fo0/48 interface is 144.254.32.2/24. Which routing table entry is visible on Router A?
- A. 144.254.0.0/24
- B. 144.254.0.0/16
- C. 144.254.32.2/24
- D. 144.254.32.0/24
Answer: D
NEW QUESTION # 40
When configuring a switch, which CLI mode only supports limited show commands?
- A. EXEC
- B. Maintenance
- C. EXEC Privilege
- D. Configuration
Answer: A
NEW QUESTION # 41
A network administrator has a stack of four Dell EMC Networking S4800 Series switches. Each stack unit is configured with a different priority. Which switch will be elected as the management device?
- A. Switch with priority 1
- B. Switch with priority 14
- C. Switch with priority 21
- D. Switch with priority 0
Answer: A
NEW QUESTION # 42
Which field of the 802.3 frame is used by network interface cards to synchronize their receivers?
- A. Cyclic redundancy check
- B. Start frame delimiter
- C. Frame check sequence
- D. Preamble
Answer: D
NEW QUESTION # 43
Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?
- A. NIC
- B. Switch
- C. Repeater
- D. Router
Answer: C
NEW QUESTION # 44
Which Border Gateway Protocol (BGP) version supports IPv6?
- A. BGPv3
- B. BGPv4
- C. BGPv2
- D. BGPng
Answer: B
NEW QUESTION # 45
A network administrator has a Dell EMC switch that has been configured with several VLANs. Each VLAN switch virtual interface (SVI) has an IP address assigned to it with each of them on different subnets. In addition, routing has been enabled on the switch.
Which action occurs when the switch receives a packet on one of its SVIs but the destination IP address of the packet does not match the IP address of that SVI?
- A. Switch checks its routing table and forwards the packet accordingly.
- B. Switch drops the packet.
- C. Switch replies back to the source with an ICMP Reject packet.
- D. Switch duplicates the packet and sends it to all interfaces.
Answer: A
NEW QUESTION # 46
Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?
- A. PAT
- B. Inside source static
- C. Outside source static
- D. Overload
Answer: B
NEW QUESTION # 47
In which Spanning Tree protocol state does a port record MAC addresses but does not forward the data?
- A. Learning
- B. Blocking
- C. Listening
- D. Forwarding
Answer: A
NEW QUESTION # 48
Which IEEE standard defines the Data Link Layer, Discovery protocol?
- A. 802.1AX
- B. 802.1AB
- C. 802.1W
- D. 802.1D
Answer: B
NEW QUESTION # 49
What is the bandwidth of an RPM for a C9010 Network Director?
- A. 200 Mbps
- B. 2.56 Tbps
- C. 2.56 Mbps
- D. 1.52 Tbps
Answer: B
NEW QUESTION # 50
Refer to the exhibit.
Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and Gi1/0/2. Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority. Which interface becomes the root port?
- A. Switch A Gi1/0/2
- B. Switch B Gi1/0/2
- C. Switch A Gi1/0/1
- D. Switch B Gi1/0/1
Answer: C
NEW QUESTION # 51
......
Preparing for the DEA-5TT2 exam requires a solid understanding of network technologies, protocols, and security concepts. EMC provides a range of training courses, study guides, and practice exams to help you prepare for the exam. You can also find resources and study groups online to help you prepare for the exam. With the EMC DEA-5TT2 certification, you can demonstrate your knowledge and skills in networking technologies, and advance your career in IT.
Use Free DEA-5TT2 Exam Questions that Stimulates Actual EXAM : https://testking.realvce.com/DEA-5TT2-VCE-file.html