Get The Important Preparation Guide With NS0-183 Dumps
Get Totally Free Updates on NS0-183 Dumps PDF Questions
NEW QUESTION 11
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)
- A. You can change any drives or disk shelves as part of this replacement procedure.
- B. You must move the boot device from the impaired node to the replacement node.
- C. A controller model of the same type must be used to replace the impaired node.
- D. The boot device must remain intact and must not be removed from the impaired node.
Answer: B,C
NEW QUESTION 12
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. data switch cabling
- B. shelf connectivity
- C. node CPU utilization
- D. cluster switch cabling
Answer: B,D
NEW QUESTION 13
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 1
- B. Option 4
- C. Option 3
- D. Option 2
Answer: D
NEW QUESTION 14
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?
- A. system SVM
- B. data SVM
- C. multitenancy node SVM
- D. admin SVM
Answer: B
NEW QUESTION 15
You were asked to install a FAS9000 with two quad-port SAS PCI cards. The SAS PCI cards are installed in slot 9 and slot 1. In preparation for the installation, you are filling out the SAS cabling worksheet. In this scenario, which ports are used for the second stack?
- A. 9a/1a
- B. 9a/1d
- C. 9b/1b
- D. 9c/1a
Answer: B
NEW QUESTION 16
When completing a new ONTAP 9.5 cluster base installation, which three SVM types will be present on the system by default? (Choose three.)
- A. system SVM
- B. data SVM
- C. cluster SVM
- D. node SVM
- E. admin SVM
Answer: A,D,E
NEW QUESTION 17
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
- A. FCP
- B. NVMe
- C. CIFS
- D. iSCSI
Answer: A,C
NEW QUESTION 18
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure a trap host on the cluster.
- B. Configure DNS on the cluster.
- C. Configure an SNMP community string on the cluster.
- D. Configure a firewall policy and allow SNMP.
Answer: A,B
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_configure_SNMP_monitoring_on_DATA_ONTAP
NEW QUESTION 19
Which statement regarding a node-management LIF is true?
- A. The LIF can be set only on the built-in node-management port - e0M.
- B. The LIF can be set up on a dedicated VLAN in the cluster network.
- C. The LIF can be set up on a dedicated VLAN in the data network.
- D. The LIF must use two switches for redundancy purposes.
Answer: C
NEW QUESTION 20
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID_DP
- B. RAID1
- C. RAID4
- D. RAID_TEC
Answer: D
NEW QUESTION 21
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. management LIFs
- B. cluster LIFs
- C. client network
- D. private network
Answer: B,D
NEW QUESTION 22
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A subscription license is required.
- B. A capacity license is required.
- C. No license is required.
- D. A site license is required.
Answer: B
NEW QUESTION 23
Which statement about LIFs is true?
- A. A data LIF can be associated with multiple SVMs.
- B. One port can host multiple data LIFs.
- C. One cluster-management LIF exists per node.
- D. Cluster LIFs and data LIFs can share a port.
Answer: B
NEW QUESTION 24
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. SNMP traps
- B. command history
- C. EMS messages
- D. AutoSupport messages
Answer: B,D
Explanation:
Explanation/Reference: https://www.netapp.com/media/10674-tr4569.pdf
NEW QUESTION 25
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure a trap host on the cluster.
- B. Configure DNS on the cluster.
- C. Configure an SNMP community string on the cluster.
- D. Configure a firewall policy and allow SNMP.
Answer: A,B
Explanation:
Explanation/Reference: http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-
525CBCFB-E855-4FE6-B975-0AB69F499110.html
NEW QUESTION 26
After setting up a new cluster, you run an AutoSupport message for a test.
Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)
- A. system node autosupport show history
- B. system node autosupport option show
- C. system node autosupport history show
- D. system node autosupport show
Answer: C,D
NEW QUESTION 27
Which statement describes an SVM?
- A. An SVM is a logical network interface.
- B. An SVM is a storage volume type.
- C. An SVM is a logical device that shares data.
- D. An SVM is a node in the cluster.
Answer: C
NEW QUESTION 28
What is the default shelf ID for disk shelves with IOM12 modules?
- A. 0
- B. 1
- C. 01
- D. 00
Answer: D
NEW QUESTION 29
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. BGP
- B. broadcast domains
- C. routing
- D. IPspaces
Answer: D
NEW QUESTION 30
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure protocols.
- B. Configure a remote tier.
- C. Configure aggregates.
- D. Configure cluster LIFs.
Answer: A
Explanation:
https://docs.netapp.com/us-en/ontap/task_configure_ontap.html
NEW QUESTION 31
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A subscription license is required.
- B. A capacity license is required.
- C. No license is required.
- D. A site license is required.
Answer: B
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/7336-tr4743.pdf (27)
NEW QUESTION 32
......
Prepare With Top Rated High-quality NS0-183 Dumps For Success in Exam: https://testking.realvce.com/NS0-183-VCE-file.html