[Full-Version] 2024 New Preparation Guide of Veeam VMCE_v12 Exam
VMCE_v12 Practice Exam - 62 Unique Questions
NEW QUESTION # 37
When planning to back up files and folders from shared sources, that is the correct method to connect to the file share from the Veeam backup server?
- A. Add the file share into the store infrastructure
- B. Add the file share into the physical infrastructure
- C. Add the file share into the managed servers
- D. Add the file share into the inventory
Answer: D
NEW QUESTION # 38
On Monday, a backup administrator found out that some backup jobs were missing from a configuration. They want to roll back the configuration database to Fridays state. Which configuration restore mode should be used?
- A. Migrate
- B. Veeam Explorer for Microsoft SQL
- C. Instant SQL Recovery
- D. Restart
Answer: D
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/vbr_config_restore.html?ver=120
NEW QUESTION # 39
A backup of a Windows VM running on a Hyper-V Cluster has been created. In which scenario can the Quick Rollback option be used during a Full VM Restore of the VM?
- A. Issues caused by storage data corruption
- B. Issues caused by a Windows update
- C. Migration of VM to VMware host in the same data center
- D. Migration of VM to Hyper-V host in a different data center
Answer: B
NEW QUESTION # 40
At 18:00, after a power outage, a VM is stuck in an infinite boot loop. The VM is configured as follows.
The last backup was created at 01:00. Choose the recovery approach that results in the least amount of data loss and lowest chance of data corruption.
- A. Instant VM Recovery
- B. VM disk recovery
- C. VM disk recovery with quick rollback
- D. Instant VM Recovery with quick rollback
Answer: A
NEW QUESTION # 41
A Windows VM running on Microsoft Hyper-V is protected using the file indexing option. The guest interaction proxy is offline. Which of the following Veeam servers will be used to deploy the runtime during the backup process?
- A. Virtual lab server
- B. Backup & Replication server
- C. File proxy server
- D. Indexing database server
Answer: B
Explanation:
Explanation
https://helpcenter.veeam.com/archive/backup/110/hyperv/guest_interaction_proxy.html According to the Veeam Software Help Center1, Veeam Backup & Replication deploys runtime components on a VM guest OS to perform file indexing. These components can be either non-persistent or persistent depending on whether you have enabled application-aware processing for the VM.
If you have enabled application-aware processing for the VM, Veeam Backup & Replication uses a persistent agent component that is installed on the VM guest OS during backup job session and remains on the VM after that. In this case, if the guest interaction proxy is offline, Veeam Backup & Replication will use another available guest interaction proxy or fail over to the backup server.
If you have not enabled application-aware processing for the VM, Veeam Backup & Replication uses a non-persistent runtime component that is deployed on the fly and removed after indexing is complete. In this case, if the guest interaction proxy is offline, Veeam Backup & Replication will use another available guest interaction proxy or fail over to the backup server.
NEW QUESTION # 42
A customer has a physical proxy configured for Direct Storage Access without failover to network mode. The backup fails. What could be the issue?
- A. The disks being processed are IDE and/or SATA
- B. One or more of the VM disk(s) are on Wols
- C. The storage is not added into the storage infrastructure, inside the backup and replication console
- D. Write access has not been enabled on the SAN
- E. The datastores are properly zoned and exposed to the proxy server but in read-only mode
Answer: B
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/vsphere/direct_san_access.html?ver=100
NEW QUESTION # 43
An administrator is asked to change a backup copy job from periodic mode to immediate mode. How can this be accomplished?
- A. Modify the job settings on the proxy performing the copy job.
- B. Edit the original job and select immediate copy mode from the job settings.
- C. Enable immediate mode on the repository.
- D. Create a new copy job and delete the original job.
Answer: D
Explanation:
Explanation
https://forums.veeam.com/veeam-backup-replication-f2/backup-copy-mode-t64888.html
NEW QUESTION # 44
Veeam ONE has been Installed and configured. It is necessary to monitor the three Veeam Backup & Replication servers in order to see how much backup storage is being used on the performance and capacity tiers of the backup repository server. How can this be achieved?
- A. Install the Veeam ONE Connector on each Veeam Backup & Replication server and the backup repository server. Approve the connection via the Data Protection View.
- B. Add the three Veeam Backup & Replication servers and the backup repository server under Infrastructure view.
- C. Add each Veeam Backup & Replication server and monitor storage usage through the Data Protection view.
- D. Add Mm* virtual infrastructure and look up (he backup repository server to see the guest disk space.
Answer: C
NEW QUESTION # 45
Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?
- A. Replication
- B. File to tape
- C. Backup to tape
- D. Backup copy
Answer: A
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/vsphere/replication.html?ver=100
NEW QUESTION # 46
A daily backup job for seven Hyper-V VMs has been configured at the main site, keeping 14 days' worth of backup files. They want to get a copy of the VM backups to a repository at the disaster recovery site. They want to keep six months' worth of backup files at the disaster recovery site. They also need to be able to restore the VMs to any given day within two months and any given week within six months. How should a backup copy job be configured to meet these requirements?
- A. Use immediate copy (mirroring) mode, keeping 62 days of retention and 26 weekly GFS restore points.
- B. Use immediate copy (mirroring) mode, keeping 180 days of retention.
- C. Use periodic copy (pruning) mode, keeping 62 days of retention and six monthly GFS restore points.
- D. Use periodic copy (pruning) mode, keeping 180 days of retention.
Answer: A
Explanation:
Explanation
According to the Veeam Backup & Replication user guide1, you can use a long-term retention policy (GFS) to keep backup files for longer periods oftime. GFS stands for grandfather-father-son and refers to a backup rotation scheme that allows you to create weekly, monthly, quarterly and yearly restore points12.
Therefore, if you want to be able to restore the VMs to any given day within two months and any given week within six months, you should use a GFS policy with 62 days of retention and 26 weekly GFS restore points.
The simplest configuration would be an immediate copy (mirroring) mode with these settings (option B).
NEW QUESTION # 47
For general data protection regulation (GDPR) compliance, Veeam can add a location tag to which component?
- A. Proxy server
- B. Backup repository
- C. Guest interaction proxy
- D. Backupob
Answer: B
NEW QUESTION # 48
Why is It recommended to have at least one backup proxy server in each site when defining a replica Job?
- A. The proxies allow replication automatic restart after failure.
- B. The proxies allow for no VM snapshots during transit.
- C. The proxies enable a stable connection for VM data transfer across sites.
- D. The proxies allow automatic WAN acceleration.
Answer: C
Explanation:
Explanation
A backup proxy is a component that acts as a data mover in the backup infrastructure. It retrieves data from the source and transfers it to the target1. When defining a replica job, it is recommended to have at least one backup proxy server in each site to enable a stable connection for VM data transfer across sites2. This way, the backup proxy at the source site can communicate with the backup proxy at the target site and send data over the WAN without affecting the production hosts2. The other options are not correct for explaining why backup proxies are recommended. The proxies do not allowautomatic WAN acceleration, as this is a function of the WAN accelerators3. The proxies do not allow for no VM snapshots during transit, as the replication process requires creating a snapshot of the source VM to read its data. The proxies do not allow replication automatic restart after failure, as this is a setting of the replication job.
References1: Backup Proxy.2: Replication Architecture.3: WAN Acceleration.: [Replication Process].:
[Replication Job Settings].
NEW QUESTION # 49
A Veeam administrator Is restoring a user object from Active Directory using the Veeam Explorer for Microsoft Active Directory. They want to restore the user object including the password. What options exist for restoring the object with a password? (Choose 2)
- A. Restore the user object to the source domain
- B. Show password
- C. Allow user to set password
- D. Send password to user account via email
- E. Use "Restore objects to" and choose the "Restore password" option
Answer: E
NEW QUESTION # 50
For Veeam agent backup jobs, what feature is only available with Veeam Agent for Microsoft Windows?
- A. Backup from storage snapshots
- B. Volume backup
- C. Application-aware processing of
- D. File-level backup
Answer: C
Explanation:
Application-aware processing is a feature exclusive to Veeam Agent for Microsoft Windows. It allows for the creation of consistent backups of Windows-based applications and ensures that databases and applications like Microsoft Active Directory, SQL Server, Exchange, and SharePoint are quiesced and in a consistent state when being backed up.References:
* Veeam Agent for Microsoft Windows User Guide: Application-Aware Processing
* Veeam Help Center: Application-Aware Processing in Veeam Agent for Windows
NEW QUESTION # 51
A company needs several VMware thick provisioned VMs restored. The physical proxies used for restoration have access to the Fibre Channel datastores used by VMware. Which transport mode will be used by default to restore these VMs?
- A. Direct Storage Access
- B. Network mode
- C. Quick Migration
- D. Virtual appliance
Answer: A
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/direct_san_access.html?ver=120
NEW QUESTION # 52
An administrator Is asked to change a backup copy Job from periodic mode to immediate mode. How can this be accomplished?
- A. Right click on the job name and choose immediate.
- B. Enable immediate in the backup copy job settings drop down.
- C. Create a new backup copy job and delete the original job.
- D. Copy the original backup copy job to a different folder and remap the job.
Answer: C
Explanation:
Explanation
https://helpcenter.veeam.com/archive/backup/110/vsphere/backup_copy_modes.html
NEW QUESTION # 53
An engineer needs to make sure that a backup job includes both the virtual machine's disk files and the Microsoft SQL database transaction logs.
Which backup feature in Veeam Backup and Replication should be used?
- A. Crash consistent mode
- B. Application-aware processing
- C. Appconsistent mode
- D. Guest file system indexing
Answer: B
Explanation:
To ensure that a backup job includes both the virtual machine's disk files and the Microsoft SQL database transaction logs, Application-aware processing should be used. This feature enables Veeam Backup & Replication to create transactionally consistent backups of VMs running VSS-aware applications like Microsoft SQL Server, ensuring that both the VM disks and the SQL transaction logs are properly backed up.References:Veeam Backup & Replication User Guide, Veeam Application-Aware Processing Guide
NEW QUESTION # 54
Hourly backup jobs are configured to local repositories. Daily backups must be sent from Site B to the repository on Site A.
The connection between the two sites does not allow a direct backup to complete within the backup window.
Impact on the source VMs at Site B should be minimized.
Which type of job and Veeam components should be used to provide the necessary protection?
- A. A backup job and components 5 - 2
- B. A backup copy job and components 6 -> 5 -> 4 - 3 -> 1 -> 2
- C. A backup job and components 5 -> 4 -> 3 -> 2
- D. A backup copy job and components 6 - 4 -> 3 + 2
Answer: B
NEW QUESTION # 55
......
Latest Questions VMCE_v12 Guide to Prepare Free Practice Tests: https://testking.realvce.com/VMCE_v12-VCE-file.html