HP HPE6-A66 Real 2024 Braindumps Mock Exam Dumps
HPE6-A66 Exam Questions | Real HPE6-A66 Practice Dumps
HP HPE6-A66 (Aruba Certified Design Associate) Exam is an essential certification for IT professionals who want to demonstrate their expertise in wireless network design using Aruba products and technologies. Aruba Certified Design Associate Exam certification validates the knowledge and skills required to design and deploy complex wireless networks that meet the business needs of organizations.
HPE6-A66 certification is an entry-level certification that provides a solid foundation for individuals looking to work with Aruba wireless networking solutions. Aruba Certified Design Associate Exam certification is widely recognized in the industry and is a valuable asset for professionals looking to demonstrate their skills and knowledge in the field of network design and implementation. With the HPE6-A66 certification, individuals can demonstrate their expertise in designing and implementing secure, reliable, and scalable wireless networks that meet the needs of their organization.
NEW QUESTION # 35
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 5406R
- B. 2930M
- C. 2930F
- D. 0
Answer: D
NEW QUESTION # 36
A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?
- A. Minimum -70db. 1 AP per 5,000 square feet, high density design
- B. Minimum -65db, 1 AP per 2,500 square feet, high density design
- C. Minimum -80db, 1 AP per 1,000 square feet, very high-density design
- D. Minimum -70db, 1 AP per 2,500 square feet, capacity design
Answer: B
NEW QUESTION # 37
A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer's requirements?
- A. Mesh stacking
- B. Backplane stacking
- C. VSX
- D. VSF
Answer: B
NEW QUESTION # 38
Which feature does the Aruba AP 555 support? (Select two.)
- A. high density indoor locations
- B. three radios
- C. desk wall plate mounted
- D. weather proof and temperature hardened
- E. 802.11ac and lower standards only
Answer: A,E
NEW QUESTION # 39
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of a Floorplan View
- B. Define the appropriate dimensions of each room in a Floorplan View
- C. Define the appropriate dimensions of each object in a Floorplan View
- D. Define the appropriate dimensions of a Floorplan and Building View
Answer: C
NEW QUESTION # 40
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?
- A. AP power at 50% and a measurement of -65 dBM on the measuring device
- B. AP power at 75% and a measurement of -80 dBM on the measuring device
- C. AP power at 75% and a measurement of -90 dBM on the measuring device
- D. AP power at 100% and a measurement of -65 dBM on the measuring device
Answer: D
NEW QUESTION # 41
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 0
- B. 1
- C. 7240XM
- D. 2
Answer: B
NEW QUESTION # 42
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Virtual
- B. Passive
- C. Active
- D. Spectrum clearing
Answer: C
NEW QUESTION # 43
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 44
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?
- A. Highly mobile devices (HMD)
- B. Somewhat mobile devices (SMD)
- C. Stationary devices
- D. Nomadic devices
Answer: D
NEW QUESTION # 45
A network architect is designing a new Wi-Fi solution for a small university The solution will involve two mobility controllers that will be clustered at the campus core Because students use a lot of video in both the dormitory rooms and in the classrooms, the solution will need to support 50Gbps via link aggregation between the controllers and core switches.
Which solution would most cost-effectively meet this requirement for the campus core?
- A. Aruba 7210 mobility controllers and 5406R switches
- B. Aruba 7280 mobility controllers and 5406R switches
- C. Aruba 7240XM mobility controllers and 3810M switches
- D. Aruba 7220 mobility controllers and 3810M switches
Answer: D
NEW QUESTION # 46
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. FRAPs in a cluster
- B. Two 7030 mobility controller and campus APs in a cluster
- C. Two 7205 mobility controller and campus APs in a cluster
- D. lAPs in a cluster
Answer: A
NEW QUESTION # 47
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
- A. A + B + C
- B. A + B
- C. A + B + C + D
- D. A + C
Answer: C
NEW QUESTION # 48
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
- A. three-tier and 40 Gbps
- B. three-tier and 10 Gbps
- C. two-tier and 40 Gbps
- D. two-tier and 10 Gbps
Answer: B
NEW QUESTION # 49
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?
- A. 2.5 Gbps
- B. 1 Gbps
- C. 5 Gbps
- D. 10 Gbps
Answer: A
NEW QUESTION # 50
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?
- A. Aruba 2540
- B. Aruba 2930M
- C. Aruba 2930F
- D. OfficeConnect 1950
Answer: B
NEW QUESTION # 51
A network architect is given the task to design a new network solution for NewStellar Company, Inc. NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1, Floor 2, including the central area, and that half the required APs will connect to each wiring closet, approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+ needs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 52
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?
- A. 2930M switches
- B. 5406R switches
- C. 3810M switches
- D. 2930F switches
Answer: A
NEW QUESTION # 53
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 6300 series
- B. 5400R series
- C. 8300 series
- D. 3810M series
Answer: D
NEW QUESTION # 54
Which feature does the Aruba AP 387 support?
- A. Indoor usage
- B. included external directional antennas
- C. 802.11 ax
- D. 60GHZRF
Answer: D
NEW QUESTION # 55
A network architect needs to plan a new wireless network
- A. Airwave, Central, and Windows only
- B. Airwave, Central, Windows, Mac OSX, and Linux
- C. Central only
- D. Airwave and Central only
Answer: D
NEW QUESTION # 56
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. ceiling height
- B. types of users and their devices
- C. number of buildings
- D. square footage
- E. number of users
Answer: A,D
NEW QUESTION # 57
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 58
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- A. density of users
- B. type of users
- C. number of users per location
- D. mobility requirements and usage
Answer: D
NEW QUESTION # 59
......
Verified HPE6-A66 Exam Dumps Q&As - Provide HPE6-A66 with Correct Answers: https://testking.realvce.com/HPE6-A66-VCE-file.html