NEW 2023 Certification Sample Questions DES-6322 Dumps & Practice Exam [Q49-Q66]

Share

NEW 2023 Certification Sample Questions DES-6322 Dumps & Practice Exam

DES-6322 Deluxe Study Guide with Online Test Engine

NEW QUESTION # 49
Which series of VxRail nodes supports either Intel or AMD processors and either hybrid or All-Flash storage?

  • A. D Series
  • B. V Series
  • C. G Series
  • D. E Series

Answer: C


NEW QUESTION # 50
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.




Answer:

Explanation:
Send your suggestions for this question.


NEW QUESTION # 51
Match each component of the VxRail HCI System Software to its description.

Answer:

Explanation:


NEW QUESTION # 52
What are the requirements for a customer-supplied VDS in a VxRail deployment?

  • A. 2 or 4 uplinks
    Port groups for Discovery, Management vCenter Server, vMotion, and vSAN
  • B. 2 or 4 uplinks
    Port groups for Discovery, Management, vMotion, and vSAN only
  • C. 4 or 8 uplinks
    Port groups for Discovery, Management, vCenter Server, vMotion, and vSAN
  • D. 4 or 8 uplinks
    Port groups for Discovery, Management, vMotion, and vSAN only

Answer: A

Explanation:


NEW QUESTION # 53
According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?

  • A. D Series
  • B. V Series
  • C. G Series
  • D. E Series

Answer: D


NEW QUESTION # 54
An implementation engineer is configuring External SRS. Where can they find the installation files for SRS VE?

  • A. VxRail Manager
  • B. SolVe Online
  • C. VxRail Support Matrix
  • D. Dell Support Page

Answer: A


NEW QUESTION # 55
Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?

  • A. New node must be at the same VxRail version as existing nodes
  • B. Node hardware must be identical to the other three nodes
  • C. PCIe network card must be added to all nodes
  • D. Node requires only the same drive configuration

Answer: B

Explanation:


NEW QUESTION # 56
An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.
Use the VxRail simulator to describe why the host is Incompatible.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.





  • A. Firmware of ESXi host needs to be updated
  • B. bmc and bios are running older versions
  • C. Insufficient number of vSphere licenses
  • D. Invalid vCenter 5erver license

Answer: D


NEW QUESTION # 57
What is the correct CL! command to collect only the VxRail Manager logs?

  • A. vc-support sh -v
  • B. vm-supportsh -c
  • C. generateFullBundle.py -c
  • D. generateLogBundle py -v

Answer: C


NEW QUESTION # 58
What environmental components of a 3-node VxRail cluster must be assigned IP addresses?

  • A. ESXi Mgmt, vSAN, vMotion, and iDRAC
  • B. vRealize Log Insight. vSAN, VxRail Manager, and SRS
  • C. vSAN, Witness Traffic Separation, vRealize Log Insight, and vMotion
  • D. ESXi Mgmt, vCenter, Witness Traffic Separation, and iDRAC

Answer: A


NEW QUESTION # 59
An implementation engineer logs in to the vSphere Client of a recently deployed VxRail cluster. They want to review the firmware versions on the VxRail nodes.
Which view should they use to gather this information?

  • A. Hosts and Clusters > VxRail Cluster > Monitor > VxRail > Appliances
  • B. Hosts and Clusters > VxRail Host > Configure > VxRail > iDRAC Configuration
  • C. Host and Clusters > VxRail Host > Monitor > VxRail > Physical View
  • D. Hosts and Clusters > VxRail Cluster > Configure > VxRail > System

Answer: B


NEW QUESTION # 60
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.




Answer:

Explanation:
Pending
Send your suggestions for this question.


NEW QUESTION # 61
The VxRail Deployment Wizard is being used on a VxRail cluster with a customer-supplied VDS. Which settings must be used to ensure successful installation?

  • A. Join an external vCenter Server
    Upload a configuration file (JSON)
  • B. Use the VxRail vCenter Server
    Upload a configuration file (JSON)
  • C. Join an external vCenter Server
    Use the step-by-step method
  • D. Use the VxRail vCenter Server
    Use the step-by-step method

Answer: B

Explanation:


NEW QUESTION # 62
An infrastructure system audit will begin in two weeks All data center devices will be checked to ensure they contain the installed patches and configurations. A system engineer will update the VxRail hosts with the latest patches and remediate security vulnerabilities.
What troubleshooting resource can a user receive from Dell and use proactively to help perform the remediation tasks?

  • A. SolVe Online
  • B. Log files
  • C. KB articles
  • D. Advisories

Answer: B


NEW QUESTION # 63
An implementation engineer is deploying a new VxRail cluster What should they confirm before installing the hardware?

  • A. Redundant power zones exist with adequate power cables
  • B. Service laptop is on the same IP network as the iDRACs
  • C. Power distribution supports only the power rating of a single node
  • D. At least 24 in (61 cm) of clearance exists in front of and behind the cabinet

Answer: A


NEW QUESTION # 64
Match each VxRail API request with the information to be retrieved.

Answer:

Explanation:


NEW QUESTION # 65
A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local.
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.






  • A. Option B
  • B. Option C
  • C. Option D
  • D. Option A

Answer: C


NEW QUESTION # 66
......

DES-6322 dumps review - Professional Quiz Study Materials: https://testking.realvce.com/DES-6322-VCE-file.html